| DSC 401 and 401 A |
|
specification |
| Max. 4K Capabilities |
| Resolution and Refresh Rate |
Chroma Sampling |
Max. Bit Depth per Color |
| 4096x2160 at 60 Hz |
4:4:4 |
8 bit |
| 3840x2160 at 60 Hz |
| 4096x2160 at 30 Hz |
10 bit |
| 3840x2160 at 30 Hz |
| 4096x2160 at 60 Hz |
4:2:02 |
10 bit |
| 3840x2160 at 60 Hz |
|
| Frame rate1 | 24, 25, 30, 50, or 60 fps |
| Chroma sampling1 | 4:4:4, 4:2:2, or 4:2:02 |
| Color bit depth1 | 8 or 10 bits per color |
| Signal Type | DVI 1.0, HDMI 1.4 and 2.0, HDCP 1.4 and 2.3 |
| Max. video data rate | 18 Gbps (6 Gbps per color) |
| NOTE | • 1 Subject to the maximum data rate limit. Use our calculator at www.extron.com/8Kdatarate to
determine video parameters supported by this data rate.
• 2 3840 x 2160 and 4096 x 2160 @ 50-60 Hz at 4:2:0 are supported at input only. |
|
|
| Video input |
| Number/signal type | 1 HDMI/DVI |
| Connector | 1 female HDMI A |
| Horizontal frequency | 15 kHz to 270 kHz |
| Vertical frequency | 24 Hz to 240 Hz |
| Resolution range | 640x480 to 4096x2160, 480i, 576i, 480p, 576p, 720p, 1080i, 1080p, 2K, and 3840x2160 to 4096x2160, up to 60 Hz |
| Input cable equalization | Automatic |
| Input cable length | At 4096x2160@60 Hz, 4:4:4, 8-bit color
HDMI Ultra — Up to 12 feet (3.6 meters)
HDMI Pro — 25 feet (7.6 meters) |
| NOTE | Lower resolutions may support longer transmission distances. Transmission distance varies depending on signal resolution, type of cable, and source device used. |
|
| Standards | DVI 1.0, HDMI 1.4 and 2.0, HDCP 1.4 and 2.3 |
|
| Video processing |
| Digital sampling | 8 or 10 bits per color, 600 MHz maximum pixel clock |
| Colors | 1.07 billion (10 bit, 4:4:4 processing) |
|
| Video output |
| Number/signal type | 1 HDMI/DVI (with CEC – DSC 401 A only) |
| Connector | 1 female HDMI A |
| Power for active cables | 1.1 W max. for the HDMI port |
| Peripheral device power | 250 mA on the HDMI output |
| Vertical frequency | 23.98 Hz, 24 Hz, 25 Hz, 29.97 Hz, 30 Hz, 50 Hz, 59.94 Hz, 60 Hz |
| Scaled resolutions | 640x4808, 800x6008, 1024x7688, 1280x7688, 1280x8008, 1280x10248, 1360x7688, 1366x7688, 1440x9008, 1400x10508, 1600x9008, 1680x10508, 1600x12008, 1920x12008, 2560x10808, 2560x14408, 2048x12008, 2048x15368, 2560x16008, 3840x21601,2,3,4,5,6,7,8, 4096x21601,2,3,4,5,6,7,8, and custom 1-5.
480p7,8, 576p6, 720p1,2,3,4,5,6,7,8, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8, and 2K (2048x1080)1,2,3,4,5,6,7,8
1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz, 4 = at 29.97 Hz, 5 = 30 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 Hz
|
| Output cable length | At 4096x2160 @ 60 Hz, 4:4:4, 8-bit color
HDMI Ultra — Up to 12 feet (3.6 meters)
HDMI Pro — 25 feet (7.6 meters) |
| NOTE | Lower resolutions may support longer transmission distances. Transmission distance varies depending on signal resolution, type of cable, and equalization capabilities of the display in the system. |
|
| Standards | CEC, DVI 1.0, HDMI 1.4 and 2.0, HDCP 1.4 and 2.3 |
|
| Audio |
| Gain | |
| Analog In to Analog Out | Unbalanced output: 0 dB
Balanced output: +6 dB |
| LPCM-2Ch in to analog out | Unbalanced output: -6 dB
Balanced output: 0 db |
| Frequency response | 20 Hz to 20 kHz, ± 0.5 dB |
| THD + Noise | <0.1%, 20 Hz to 20 kHz bandwidth at nominal level |
| S/N (unweighted) | >90 dB at max balanced output |
| Stereo channel separation | >80 dB at 1 kHz |
| Supported formats | |
| Analog de-embedding | LPCM up to 2.0/24-bit/96 kHz (DSC 401 A only) |
| HDMI pass-through | LPCM up to 7.1/24-bit/192 kHz, Dolby Atmos, Dolby TrueHD, Dolby legacy formats, DTS-X, DTS-HD Master Audio, DTS 96/24, and DTS legacy formats |
|
| Audio input |
| Number/signal type | 1 digital stereo, de-embedded from HDMI (LPCM-2CH only)
1 stereo line level unbalanced (DSC 401 A only) |
| Connectors | |
| DSC 401 | 1 female HDMI A |
| DSC 401 A | 1 female HDMI A
(1) 3.5 mm TRS (Tip – L, Ring – R, Sleeve – Ground) |
| Impedance | >10k ohms unbalanced (DSC 401 A only) |
| Nominal level | Line input: -10 dBV (316 mVrms), adjustable (DSC 401 A only) |
| Maximum level | +15 dBu, unbalanced (DSC 401 A only) |
| CMRR | 65 dB @ 1 kHz (DSC 401 A only) |
| Input gain adjustment | -18 dB to +24 dB, analog input only (DSC 401 A only) |
|
| Audio output |
| Number/signal type | |
| DSC 401 | 1 HDMI embedded |
| DSC 401 A | 1 HDMI embedded
1 stereo/mono, balanced or unbalanced |
| Connectors | |
| DSC 401 | 1 female HDMI A |
| DSC 401 A | 1 female HDMI A
(1) 3.5 mm, 5 pole captive screw |
| Impedance | 50 ohms unbalanced, 100 ohms balanced (DSC 401 A only) |
| Gain error | ±0.5 dB channel to channel |
| Maximum level (Hi-Z) | >+21 dBu balanced, >+15 dBu, unbalanced (DSC 401 A only) |
| Volume range | -100 dB to 0 dB in 1.0 dB increments |
|
| Communication |
| USB control port | 1 female USB-C on front panel |
| Standard | Ethernet over USB (RNDIS) |
| Ethernet setting | IP address: 203.0.113.22 |
| Ethernet port — DSC 401 A only |
| Connector | 1 female RJ-45 |
| Ethernet data rate | 10/100/1000 base-T, half/full duplex with auto detect |
| Ethernet protocol | ARP, DHCP, DNS, HTTP (redirect), HTTPS, IEEE 802.1X, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, Telnet, UDP/IP |
| Ethernet default settings | Link speed and duplex: Auto-detected
IP address: 192.168.254.254
Subnet mask: 255.255.0.0
Gateway: 0.0.0.0
DHCP: Off |
| Program control | On-screen display (OSD) via front panel control
Extron Simple Instruction Set (SIS™) commands
Extron Product Configuration Software (PCS) for Windows®
Extron Toolbelt Software |
| Storage | 512 MB user memory |
|
| General |
| Power supply | External
Input: 100-240 VAC, 50-60 Hz |
| Power input connectors | (1) 2 pole captive screw, 12 VDC
1 RJ-45, PoE 48 VDC (DSC 401 A only) |
| Power consumption | |
| Full power | |
| DSC 401 | 7.4 watts |
| DSC 401 and power supply | 8.1 watts |
| DSC 401 A | 8.5 watts |
| DSC 401 A and power supply | 9.3 watts |
| Power save mode | |
| DSC 401 | 4.6 watts |
| DSC 401 and power supply | 5.4 watts |
| DSC 401 A | 5.6 watts |
| DSC 401 A and power supply | 6.6 watts |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 50%, noncondensing |
| Cooling | Convection, vents sides and top |
| Thermal dissipation | |
| Full power | |
| DSC 401 | 24.2 BTU/hr |
| DSC 401 and power supply | 26.7 BTU/hr |
| DSC 401 A | 27.8 BTU/hr |
| DSC 401 A and power supply | 30.8 BTU/hr |
| Power save mode | |
| DSC 401 | 15.5 BTU/hr |
| DSC 401 and power supply | 18.3 BTU/hr |
| DSC 401 A | 19.1 BTU/hr |
| DSC 401 A and power supply | 22.3 BTU/hr |
| Mounting | |
| Rack mount | Yes, with optional rack shelf |
| Enclosure type | Metal |
| Enclosure dimensions | 1.0" H x 4.25" W x 6.0" D (1" high, quarter-rack wide)
(25 mm H x 108 mm W x 152 mm D)
(Depth excludes connectors.) |
| Product weight | |
| DSC 401 | 0.6 lbs (0.3 kg) |
| DSC 401 A | 0.6 lbs (0.3 kg) |
| Regulatory compliance | UL, c-UL, CE, C-tick, FCC Class A, ICES, VCCI, RoHS, WEEE |
| Product warranty | 3 years parts and labor |
| Everlast power supply warranty | 7 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (6557-D8) |