近期查看的产品
FOX Matrix 7200
建筑工程规范
选择一个产品编号：
复制文本
已复制！
发生错误。请稍后重试。
FOX I/O 88 MM
- Shall provide a multimode fiber optic I/O board designed for use with the Extron FOX Matrix 3200 and FOX Matrix 7200 matrix switchers that shall support the switching and distribution of video, audio, and control signals
- Single slot fiber optic I/O board designed for use with the Extron FOX Matrix 3200 and FOX Matrix 7200 matrix switchers
- Input and output requirements
- Shall provide sixteen (16) LC-type connectors for fiber optic signals
- Eight (8) input connectors per board
- Eight (8) output connectors per board
- Shall provide selectable input and output reclocking
- Shall provide Status LED indicators for fiber link and reclocking status
- Shall support remote device connections via fiber optic transmitters and receivers
- Shall be compatible with Extron FOX and FOX II Series MM fiber optic extenders
- Shall be compatible with Extron FOX Series MM products for AV signal distribution and routing over fiber optic cabling
- Shall be compatible with Extron FOX II Series MM products for AV signal distribution and routing over fiber optic cabling
- Shall provide sixteen (16) LC-type connectors for fiber optic signals
- Signal switching requirements
- Shall support all-digital switching of DisplayPort, HDMI, DVI, 3G-SDI, RGB, HD component, and standard definition video, as well as audio and control signals
- Shall support a mix of digital and analog video source signal types
- Shall support computer and video resolutions up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling and 10 bits color bit depth
- Support 4K up to 30 Hz with 8 bits per color over one connection
- Support 4K at 50 or 60 Hz with 8 bits per color over two parallel connections
- Support 4K at 50 or 60 Hz with 10 bits per color over four parallel connections
- Support 4K at 120 Hz with 8 bits per color over four parallel connections
- Shall be compatible with Extron FOX Series USB extenders for all-digital switching of USB signals
- Transmission requirement
- Shall support a maximum signal transmission distance up to 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cable at 850 nm
- Shall provide an optical loss budget of 7 dB between each board I/O and a connected FOX or FOX II Series MM device
- HDCP requirements
- Shall include Extron SpeedSwitch® technology for high-speed switching of HDCP-encrypted content
- General requirements
- Shall be installed in a FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall receive power from the backplane when installed in a FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall be configured and controlled via the FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall be hot-swappable
- Shall be compatible with FOX Matrix 3200 and FOX Matrix 7200 matrix switchers
- Shall be compatible with Extron FOX Series MM products for AV signal distribution and routing over fiber optic cabling
- Shall be compatible with Extron FOX II Series MM products for AV signal distribution and routing over fiber optic cabling
- Approved device shall be the Extron FOX I/O 88 MM (70-791-21); no alternates or equals
FOX I/O 88 MM
- Shall provide a multimode fiber optic I/O board designed for use with the Extron FOX Matrix 3200 and FOX Matrix 7200 matrix switchers that shall support the switching and distribution of video, audio, and control signals
- Single slot fiber optic I/O board designed for use with the Extron FOX Matrix 3200 and FOX Matrix 7200 matrix switchers
- Input and output requirements
- Shall provide sixteen (16) LC-type connectors for fiber optic signals
- Eight (8) input connectors per board
- Eight (8) output connectors per board
- Shall provide selectable input and output reclocking
- Shall provide Status LED indicators for fiber link and reclocking status
- Shall support remote device connections via fiber optic transmitters and receivers
- Shall be compatible with Extron FOX and FOX II Series MM fiber optic extenders
- Shall be compatible with Extron FOX Series MM products for AV signal distribution and routing over fiber optic cabling
- Shall be compatible with Extron FOX II Series MM products for AV signal distribution and routing over fiber optic cabling
- Shall provide sixteen (16) LC-type connectors for fiber optic signals
- Signal switching requirements
- Shall support all-digital switching of DisplayPort, HDMI, DVI, 3G-SDI, RGB, HD component, and standard definition video, as well as audio and control signals
- Shall support a mix of digital and analog video source signal types
- Shall support computer and video resolutions up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling and 10 bits color bit depth
- Support 4K up to 30 Hz with 8 bits per color over one connection
- Support 4K at 50 or 60 Hz with 8 bits per color over two parallel connections
- Support 4K at 50 or 60 Hz with 10 bits per color over four parallel connections
- Support 4K at 120 Hz with 8 bits per color over four parallel connections
- Shall be compatible with Extron FOX Series USB extenders for all-digital switching of USB signals
- Transmission requirement
- Shall support a maximum signal transmission distance up to 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cable at 850 nm
- Shall provide an optical loss budget of 7 dB between each board I/O and a connected FOX or FOX II Series MM device
- HDCP requirements
- Shall include Extron SpeedSwitch® technology for high-speed switching of HDCP-encrypted content
- General requirements
- Shall be installed in a FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall receive power from the backplane when installed in a FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall be configured and controlled via the FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall be hot-swappable
- Shall be compatible with FOX Matrix 3200 and FOX Matrix 7200 matrix switchers
- Shall be compatible with Extron FOX Series MM products for AV signal distribution and routing over fiber optic cabling
- Shall be compatible with Extron FOX II Series MM products for AV signal distribution and routing over fiber optic cabling
- Approved device shall be the Extron FOX I/O 88 MM (70-791-21); no alternates or equals
FOX I/O 88 SM
- Shall provide a singlemode fiber optic I/O board designed for use with the Extron FOX Matrix 3200 and FOX Matrix 7200 matrix switchers that shall support the switching and distribution of video, audio, and control signals
- Single slot fiber optic I/O board designed for use with the Extron FOX Matrix 3200 and FOX Matrix 7200 matrix switchers
- Input and output requirements
- Shall provide sixteen (16) LC-type connectors for fiber optic signals
- Eight (8) input connectors per board
- Eight (8) output connectors per board
- Shall provide selectable input and output reclocking
- Shall provide Status LED indicators for fiber link and reclocking status
- Shall support remote device connections via fiber optic transmitters and receivers
- Shall be compatible with Extron FOX and FOX II Series SM fiber optic extenders
- Shall be compatible with Extron FOX Series SM products for AV signal distribution and routing over fiber optic cabling
- Shall be compatible with Extron FOX II Series SM products for AV signal distribution and routing over fiber optic cabling
- Shall provide sixteen (16) LC-type connectors for fiber optic signals
- Signal switching requirements
- Shall support all-digital switching of DisplayPort, HDMI, DVI, 3G-SDI, RGB, HD component, and standard definition video, as well as audio and control signals
- Shall support a mix of digital and analog video source signal types
- Shall support computer and video resolutions up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling and 10 bits color bit depth
- Support 4K up to 30 Hz with 8 bits per color over one connection
- Support 4K at 50 or 60 Hz with 8 bits per color over two parallel connections
- Support 4K at 50 or 60 Hz with 10 bits per color over four parallel connections
- Support 4K at 120 Hz with 8 bits per color over four parallel connections
- Shall be compatible with Extron FOX Series USB extenders for all-digital switching of USB signals
- Transmission requirement
- Shall support a maximum signal transmission distance up to 30 km (18.75 miles) over singlemode fiber optic cable at 1310 nm
- Shall provide an optical loss budget of 13 dB between each board I/O and a connected FOX or FOX II Series SM device
- HDCP requirements
- Shall include Extron SpeedSwitch® technology for high-speed switching of HDCP-encrypted content
- General requirements
- Shall be installed in a FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall receive power from the backplane when installed in a FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall be configured and controlled via the FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall be hot-swappable
- Shall be compatible with FOX Matrix 3200 and FOX Matrix 7200 matrix switchers
- Approved device shall be the Extron FOX I/O 88 SM (70-791-22); no alternates or equals
FOX I/O 88 SM
- Shall provide a singlemode fiber optic I/O board designed for use with the Extron FOX Matrix 3200 and FOX Matrix 7200 matrix switchers that shall support the switching and distribution of video, audio, and control signals
- Single slot fiber optic I/O board designed for use with the Extron FOX Matrix 3200 and FOX Matrix 7200 matrix switchers
- Input and output requirements
- Shall provide sixteen (16) LC-type connectors for fiber optic signals
- Eight (8) input connectors per board
- Eight (8) output connectors per board
- Shall provide selectable input and output reclocking
- Shall provide Status LED indicators for fiber link and reclocking status
- Shall support remote device connections via fiber optic transmitters and receivers
- Shall be compatible with Extron FOX and FOX II Series SM fiber optic extenders
- Shall be compatible with Extron FOX Series SM products for AV signal distribution and routing over fiber optic cabling
- Shall be compatible with Extron FOX II Series SM products for AV signal distribution and routing over fiber optic cabling
- Shall provide sixteen (16) LC-type connectors for fiber optic signals
- Signal switching requirements
- Shall support all-digital switching of DisplayPort, HDMI, DVI, 3G-SDI, RGB, HD component, and standard definition video, as well as audio and control signals
- Shall support a mix of digital and analog video source signal types
- Shall support computer and video resolutions up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling and 10 bits color bit depth
- Support 4K up to 30 Hz with 8 bits per color over one connection
- Support 4K at 50 or 60 Hz with 8 bits per color over two parallel connections
- Support 4K at 50 or 60 Hz with 10 bits per color over four parallel connections
- Support 4K at 120 Hz with 8 bits per color over four parallel connections
- Shall be compatible with Extron FOX Series USB extenders for all-digital switching of USB signals
- Transmission requirement
- Shall support a maximum signal transmission distance up to 30 km (18.75 miles) over singlemode fiber optic cable at 1310 nm
- Shall provide an optical loss budget of 13 dB between each board I/O and a connected FOX or FOX II Series SM device
- HDCP requirements
- Shall include Extron SpeedSwitch® technology for high-speed switching of HDCP-encrypted content
- General requirements
- Shall be installed in a FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall receive power from the backplane when installed in a FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall be configured and controlled via the FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall be hot-swappable
- Shall be compatible with FOX Matrix 3200 and FOX Matrix 7200 matrix switchers
- Approved device shall be the Extron FOX I/O 88 SM (70-791-22); no alternates or equals
把商品添加到购物车
Order Message Number
产品编号
注: 使用通用交流电源插座的 Extron 产品可支持多种不同的交流电源插头类型。在使用之前，确保设备满足您所在区域的所有规定要求，并符合所有应用的本地安全和电气规程及标准。
当前总计：
Annotation Graphics Processor
To view this page ensure that Adobe Flash Player version
11.0.0 or greater is installed and enabled.
Chrome
Firefox
Edge
Safari