近期查看的产品
eLink 100
建筑工程规范
选择一个产品编号：
复制文本
已复制！
发生错误。请稍后重试。
eLink 100 T US
- Provide a wireless transmitter that shall support the distribution of HDMI video and multi-channel audio
- Long distance wireless transmitter for video and embedded audio
- Video input requirements
- Shall provide one (1) HDMI Type A connector for digital video signals with embedded audio
- Shall support HDMI specifications including data rates up to 6.75 Gbps, Deep Color up to 12 bits, 3D, and multi-channel audio formats
- Shall support computer video up to 1920x1080, including HDTV 1080p @ 60 Hz
- Audio input requirements
- Shall support embedded audio on HDMI input connector
- Shall support PCM, DTS, and Dolby 5.1 audio formats
- Communication requirements
- Shall support EDID and HDCP pass-through on HDMI input connector
- Control output requirements
- Shall provide one 3.5 mm jack for IR emitter connection
- Shall support IR remote control pass-through transmission from receiver to transmitter to control source equipment, such as a Blu-ray Disc player
- Interconnection requirements
- Shall provide wireless omnidirectional interconnection between transmitter and receiver
- Shall provide internal antennas for wireless transmission
- Transmission requirements
- Shall provide a signal transmission distance capability of 100’ (30 m) at 1920x1080, including HDTV 1080p @ 60 Hz
- Shall support extension of video with embedded audio wirelessly
- Shall support less than one millisecond of latency for video and audio signals
- Shall operate in the 5 GHz spectrum
- Shall provide Automatic Frequency Selection – AFS and Dynamic Frequency Selection – DFS
- Shall actively monitor RF spectrum for interference from other wireless devices
- Shall automatically select an appropriate transmission channel to prevent interference from other devices
- Shall support multi-input and multi-output – MIMO wireless technology
- Shall support Advanced Encryption Standard – AES 128 for secure data transmission
- Shall provide the capability to register a single transmitter with up to four receivers, simultaneously, enabling a single source to support up to four display devices
- HDCP requirements
- Shall be HDCP compliant
- Power requirements
- Shall provide connection for 5 VDC power on one barrel connector
- Shall be equipped with an external, universal AC power supply capable of supporting 100 – 240 VAC, 50/60 Hz power
- General requirements
- Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
- Shall provide visual signal on LED indicators located on the top panel for link status, video signal presence, and power
- Shall provide a recessed button located on the top panel to register a transmitter to a receiver
- Shall provide a recessed button located on the top panel to reset the transmitter connection with the receiver
- Shall have a compact enclosure
- Shall be wall mountable with included mounting kit
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Shall provide at least three years parts and labor warranty
- Shall be compatible with the eLink 100 R US wireless receiver
- Approved device shall be the Extron eLink 100 T US (60-1490-02); no alternates or equals
eLink 100 T US
- Provide a wireless transmitter that shall support the distribution of HDMI video and multi-channel audio
- Long distance wireless transmitter for video and embedded audio
- Video input requirements
- Shall provide one (1) HDMI Type A connector for digital video signals with embedded audio
- Shall support HDMI specifications including data rates up to 6.75 Gbps, Deep Color up to 12 bits, 3D, and multi-channel audio formats
- Shall support computer video up to 1920x1080, including HDTV 1080p @ 60 Hz
- Audio input requirements
- Shall support embedded audio on HDMI input connector
- Shall support PCM, DTS, and Dolby 5.1 audio formats
- Communication requirements
- Shall support EDID and HDCP pass-through on HDMI input connector
- Control output requirements
- Shall provide one 3.5 mm jack for IR emitter connection
- Shall support IR remote control pass-through transmission from receiver to transmitter to control source equipment, such as a Blu-ray Disc player
- Interconnection requirements
- Shall provide wireless omnidirectional interconnection between transmitter and receiver
- Shall provide internal antennas for wireless transmission
- Transmission requirements
- Shall provide a signal transmission distance capability of 100’ (30 m) at 1920x1080, including HDTV 1080p @ 60 Hz
- Shall support extension of video with embedded audio wirelessly
- Shall support less than one millisecond of latency for video and audio signals
- Shall operate in the 5 GHz spectrum
- Shall provide Automatic Frequency Selection – AFS and Dynamic Frequency Selection – DFS
- Shall actively monitor RF spectrum for interference from other wireless devices
- Shall automatically select an appropriate transmission channel to prevent interference from other devices
- Shall support multi-input and multi-output – MIMO wireless technology
- Shall support Advanced Encryption Standard – AES 128 for secure data transmission
- Shall provide the capability to register a single transmitter with up to four receivers, simultaneously, enabling a single source to support up to four display devices
- HDCP requirements
- Shall be HDCP compliant
- Power requirements
- Shall provide connection for 5 VDC power on one barrel connector
- Shall be equipped with an external, universal AC power supply capable of supporting 100 – 240 VAC, 50/60 Hz power
- General requirements
- Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
- Shall provide visual signal on LED indicators located on the top panel for link status, video signal presence, and power
- Shall provide a recessed button located on the top panel to register a transmitter to a receiver
- Shall provide a recessed button located on the top panel to reset the transmitter connection with the receiver
- Shall have a compact enclosure
- Shall be wall mountable with included mounting kit
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Shall provide at least three years parts and labor warranty
- Shall be compatible with the eLink 100 R US wireless receiver
- Approved device shall be the Extron eLink 100 T US (60-1490-02); no alternates or equals
eLink 100 R US
- Shall provide a wireless receiver that shall support the distribution of HDMI video and multi-channel audio
- Long distance wireless receiver for video, and embedded audio
- Video output requirements
- Shall provide one (1) HDMI Type A connector for digital video signals with embedded audio
- Shall support HDMI specifications including data rates up to 6.75 Gbps, Deep Color up to 12 bits, 3D, and multi-channel audio formats
- Shall support computer video up to 1920x1080, including HDTV 1080p @ 60 Hz
- Audio output requirements
- Shall support embedded audio on HDMI output connector
- Shall support PCM, DTS, and Dolby 5.1 audio formats
- Communication requirements
- Shall support EDID and HDCP pass-through on HDMI output connector
- Control input requirements
- Shall provide one IR detector input
- Shall support IR remote control for configuration and setup
- Shall provide on-screen display – OSD menus for setup and configuration
- Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment, such as a Blu-ray player
- Interconnection requirements
- Shall provide wireless omnidirectional interconnection between transmitter and receiver
- Shall provide internal antennas for wireless transmission
- Transmission requirements
- Shall provide a signal transmission distance capability of 100’ (30 m) at 1920x1080, including HDTV 1080p @ 60 Hz
- Shall support extension of video with embedded audio wirelessly
- Shall support less than one millisecond of latency for video and audio signals
- Shall operate in the 5 GHz spectrum
- Shall provide Automatic Frequency Selection – AFS and Dynamic Frequency Selection – DFS
- Shall actively monitor RF spectrum for interference from other wireless devices
- Shall automatically select an appropriate transmission channel to prevent interference from other devices
- Shall support multi-input and multi-output – MIMO wireless technology
- Shall support Advanced Encryption Standard – AES 128 for secure data transmission
- Shall provide the capability to register a single transmitter with up to four receivers, simultaneously, enabling a single source to support up to four display devices
- HDCP requirements
- Shall be HDCP compliant
- Power requirements
- Shall provide a button located on the top panel to power up and power down the unit
- Shall provide connection for 5 VDC power on one USB mini plug connector
- Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
- General requirements
- Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
- Shall provide visual signal on LED indicators for link status, video signal presence, and power
- Shall provide a button located on the top panel to register a transmitter to a receiver
- Shall have a compact enclosure
- Shall be wall mountable with included mounting kit
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Shall provide at least three years parts and labor warranty
- Shall be compatible with the eLink 100 T US wireless transmitter
- Approved device shall be the Extron eLink 100 R US (60-1490-03); no alternates or equals
eLink 100 R US
- Shall provide a wireless receiver that shall support the distribution of HDMI video and multi-channel audio
- Long distance wireless receiver for video, and embedded audio
- Video output requirements
- Shall provide one (1) HDMI Type A connector for digital video signals with embedded audio
- Shall support HDMI specifications including data rates up to 6.75 Gbps, Deep Color up to 12 bits, 3D, and multi-channel audio formats
- Shall support computer video up to 1920x1080, including HDTV 1080p @ 60 Hz
- Audio output requirements
- Shall support embedded audio on HDMI output connector
- Shall support PCM, DTS, and Dolby 5.1 audio formats
- Communication requirements
- Shall support EDID and HDCP pass-through on HDMI output connector
- Control input requirements
- Shall provide one IR detector input
- Shall support IR remote control for configuration and setup
- Shall provide on-screen display – OSD menus for setup and configuration
- Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment, such as a Blu-ray player
- Interconnection requirements
- Shall provide wireless omnidirectional interconnection between transmitter and receiver
- Shall provide internal antennas for wireless transmission
- Transmission requirements
- Shall provide a signal transmission distance capability of 100’ (30 m) at 1920x1080, including HDTV 1080p @ 60 Hz
- Shall support extension of video with embedded audio wirelessly
- Shall support less than one millisecond of latency for video and audio signals
- Shall operate in the 5 GHz spectrum
- Shall provide Automatic Frequency Selection – AFS and Dynamic Frequency Selection – DFS
- Shall actively monitor RF spectrum for interference from other wireless devices
- Shall automatically select an appropriate transmission channel to prevent interference from other devices
- Shall support multi-input and multi-output – MIMO wireless technology
- Shall support Advanced Encryption Standard – AES 128 for secure data transmission
- Shall provide the capability to register a single transmitter with up to four receivers, simultaneously, enabling a single source to support up to four display devices
- HDCP requirements
- Shall be HDCP compliant
- Power requirements
- Shall provide a button located on the top panel to power up and power down the unit
- Shall provide connection for 5 VDC power on one USB mini plug connector
- Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
- General requirements
- Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
- Shall provide visual signal on LED indicators for link status, video signal presence, and power
- Shall provide a button located on the top panel to register a transmitter to a receiver
- Shall have a compact enclosure
- Shall be wall mountable with included mounting kit
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Shall provide at least three years parts and labor warranty
- Shall be compatible with the eLink 100 T US wireless transmitter
- Approved device shall be the Extron eLink 100 R US (60-1490-03); no alternates or equals
eLink 100 T EU
- Provide a wireless transmitter that shall support the distribution of HDMI video and multi-channel audio
- Long distance wireless transmitter for video and embedded audio
- Video input requirements
- Shall provide one (1) HDMI Type A connector for digital video signals with embedded audio
- Shall support HDMI specifications including data rates up to 6.75 Gbps, Deep Color up to 12 bits, 3D, and multi-channel audio formats
- Shall support computer video up to 1920x1080, including HDTV 1080p @ 60 Hz
- Audio input requirements
- Shall support embedded audio on HDMI input connector
- Shall support PCM, DTS, and Dolby 5.1 audio formats
- Communication requirements
- Shall support EDID and HDCP pass-through on HDMI input connector
- Control output requirements
- Shall provide one 3.5 mm jack for IR emitter connection
- Shall support IR remote control pass-through transmission from receiver to transmitter to control source equipment, such as a Blu-ray Disc player
- Interconnection requirements
- Shall provide wireless omnidirectional interconnection between transmitter and receiver
- Shall provide internal antennas for wireless transmission
- Transmission requirements
- Shall provide a signal transmission distance capability of 100’ (30 m) at 1920x1080, including HDTV 1080p @ 60 Hz
- Shall support extension of video with embedded audio wirelessly
- Shall support less than one millisecond of latency for video and audio signals
- Shall operate in the 5 GHz spectrum
- Shall provide Automatic Frequency Selection – AFS and Dynamic Frequency Selection – DFS
- Shall actively monitor RF spectrum for interference from other wireless devices
- Shall automatically select an appropriate transmission channel to prevent interference from other devices
- Shall support multi-input and multi-output – MIMO wireless technology
- Shall support Advanced Encryption Standard – AES 128 for secure data transmission
- Shall provide the capability to register a single transmitter with up to four receivers, simultaneously, enabling a single source to support up to four display devices
- HDCP requirements
- Shall be HDCP compliant
- Power requirements
- Shall provide connection for 5 VDC power on one barrel connector
- Shall be equipped with an external, universal AC power supply capable of supporting 100 – 240 VAC, 50/60 Hz power
- General requirements
- Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
- Shall provide visual signal on LED indicators located on the top panel for link status, video signal presence, and power
- Shall provide a recessed button located on the top panel to register a transmitter to a receiver
- Shall provide a recessed button located on the top panel to reset the transmitter connection with the receiver
- Shall have a compact enclosure
- Shall be wall mountable with included mounting kit
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Shall provide at least three years parts and labor warranty
- Shall be compatible with the eLink 100 R EU wireless receiver
- Approved device shall be the Extron eLink 100 T EU (60-1490-12); no alternates or equals
eLink 100 T EU
- Provide a wireless transmitter that shall support the distribution of HDMI video and multi-channel audio
- Long distance wireless transmitter for video and embedded audio
- Video input requirements
- Shall provide one (1) HDMI Type A connector for digital video signals with embedded audio
- Shall support HDMI specifications including data rates up to 6.75 Gbps, Deep Color up to 12 bits, 3D, and multi-channel audio formats
- Shall support computer video up to 1920x1080, including HDTV 1080p @ 60 Hz
- Audio input requirements
- Shall support embedded audio on HDMI input connector
- Shall support PCM, DTS, and Dolby 5.1 audio formats
- Communication requirements
- Shall support EDID and HDCP pass-through on HDMI input connector
- Control output requirements
- Shall provide one 3.5 mm jack for IR emitter connection
- Shall support IR remote control pass-through transmission from receiver to transmitter to control source equipment, such as a Blu-ray Disc player
- Interconnection requirements
- Shall provide wireless omnidirectional interconnection between transmitter and receiver
- Shall provide internal antennas for wireless transmission
- Transmission requirements
- Shall provide a signal transmission distance capability of 100’ (30 m) at 1920x1080, including HDTV 1080p @ 60 Hz
- Shall support extension of video with embedded audio wirelessly
- Shall support less than one millisecond of latency for video and audio signals
- Shall operate in the 5 GHz spectrum
- Shall provide Automatic Frequency Selection – AFS and Dynamic Frequency Selection – DFS
- Shall actively monitor RF spectrum for interference from other wireless devices
- Shall automatically select an appropriate transmission channel to prevent interference from other devices
- Shall support multi-input and multi-output – MIMO wireless technology
- Shall support Advanced Encryption Standard – AES 128 for secure data transmission
- Shall provide the capability to register a single transmitter with up to four receivers, simultaneously, enabling a single source to support up to four display devices
- HDCP requirements
- Shall be HDCP compliant
- Power requirements
- Shall provide connection for 5 VDC power on one barrel connector
- Shall be equipped with an external, universal AC power supply capable of supporting 100 – 240 VAC, 50/60 Hz power
- General requirements
- Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
- Shall provide visual signal on LED indicators located on the top panel for link status, video signal presence, and power
- Shall provide a recessed button located on the top panel to register a transmitter to a receiver
- Shall provide a recessed button located on the top panel to reset the transmitter connection with the receiver
- Shall have a compact enclosure
- Shall be wall mountable with included mounting kit
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Shall provide at least three years parts and labor warranty
- Shall be compatible with the eLink 100 R EU wireless receiver
- Approved device shall be the Extron eLink 100 T EU (60-1490-12); no alternates or equals
eLink 100 R EU
- Shall provide a wireless receiver that shall support the distribution of HDMI video and multi-channel audio
- Long distance wireless receiver for video and embedded audio
- Video output requirements
- Shall provide one (1) HDMI Type A connector for digital video signals with embedded audio
- Shall support HDMI specifications including data rates up to 6.75 Gbps, Deep Color up to 12 bits, 3D, and multi-channel audio formats
- Shall support computer video up to 1920x1080, including HDTV 1080p @ 60 Hz
- Audio output requirements
- Shall support embedded audio on HDMI output connector
- Shall support PCM, DTS, and Dolby 5.1 audio formats
- Communication requirements
- Shall support EDID and HDCP pass-through on HDMI output connector
- Control input requirements
- Shall provide one IR detector input
- Shall support IR remote control for configuration and setup
- Shall provide on-screen display – OSD menus for setup and configuration
- Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment, such as a Blu-ray player
- Interconnection requirements
- Shall provide wireless omnidirectional interconnection between transmitter and receiver
- Shall provide internal antennas for wireless transmission
- Transmission requirements
- Shall provide a signal transmission distance capability of 100’ (30 m) at 1920x1080, including HDTV 1080p @ 60 Hz
- Shall support extension of video with embedded audio wirelessly
- Shall support less than one millisecond of latency for video and audio signals
- Shall operate in the 5 GHz spectrum
- Shall provide Automatic Frequency Selection – AFS and Dynamic Frequency Selection – DFS
- Shall actively monitor RF spectrum for interference from other wireless devices
- Shall automatically select an appropriate transmission channel to prevent interference from other devices
- Shall support multi-input and multi-output – MIMO wireless technology
- Shall support Advanced Encryption Standard – AES 128 for secure data transmission
- Shall provide the capability to register a single transmitter with up to four receivers, simultaneously, enabling a single source to support up to four display devices
- HDCP requirements
- Shall be HDCP compliant
- Power requirements
- Shall provide a button located on the top panel to power up and power down the unit
- Shall provide connection for 5 VDC power on one USB mini plug connector
- Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
- General requirements
- Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
- Shall provide visual signal on LED indicators for link status, video signal presence, and power
- Shall provide a button located on the top panel to register a transmitter to a receiver
- Shall have a compact enclosure
- Shall be wall mountable with included mounting kit
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Shall provide at least three years parts and labor warranty
- Shall be compatible with the eLink 100 T EU wireless transmitter
- Approved device shall be the Extron eLink 100 R EU (60-1490-13); no alternates or equals
eLink 100 R EU
- Shall provide a wireless receiver that shall support the distribution of HDMI video and multi-channel audio
- Long distance wireless receiver for video and embedded audio
- Video output requirements
- Shall provide one (1) HDMI Type A connector for digital video signals with embedded audio
- Shall support HDMI specifications including data rates up to 6.75 Gbps, Deep Color up to 12 bits, 3D, and multi-channel audio formats
- Shall support computer video up to 1920x1080, including HDTV 1080p @ 60 Hz
- Audio output requirements
- Shall support embedded audio on HDMI output connector
- Shall support PCM, DTS, and Dolby 5.1 audio formats
- Communication requirements
- Shall support EDID and HDCP pass-through on HDMI output connector
- Control input requirements
- Shall provide one IR detector input
- Shall support IR remote control for configuration and setup
- Shall provide on-screen display – OSD menus for setup and configuration
- Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment, such as a Blu-ray player
- Interconnection requirements
- Shall provide wireless omnidirectional interconnection between transmitter and receiver
- Shall provide internal antennas for wireless transmission
- Transmission requirements
- Shall provide a signal transmission distance capability of 100’ (30 m) at 1920x1080, including HDTV 1080p @ 60 Hz
- Shall support extension of video with embedded audio wirelessly
- Shall support less than one millisecond of latency for video and audio signals
- Shall operate in the 5 GHz spectrum
- Shall provide Automatic Frequency Selection – AFS and Dynamic Frequency Selection – DFS
- Shall actively monitor RF spectrum for interference from other wireless devices
- Shall automatically select an appropriate transmission channel to prevent interference from other devices
- Shall support multi-input and multi-output – MIMO wireless technology
- Shall support Advanced Encryption Standard – AES 128 for secure data transmission
- Shall provide the capability to register a single transmitter with up to four receivers, simultaneously, enabling a single source to support up to four display devices
- HDCP requirements
- Shall be HDCP compliant
- Power requirements
- Shall provide a button located on the top panel to power up and power down the unit
- Shall provide connection for 5 VDC power on one USB mini plug connector
- Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
- General requirements
- Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
- Shall provide visual signal on LED indicators for link status, video signal presence, and power
- Shall provide a button located on the top panel to register a transmitter to a receiver
- Shall have a compact enclosure
- Shall be wall mountable with included mounting kit
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Shall provide at least three years parts and labor warranty
- Shall be compatible with the eLink 100 T EU wireless transmitter
- Approved device shall be the Extron eLink 100 R EU (60-1490-13); no alternates or equals
eLink 100 T AUS
- Provide a wireless transmitter that shall support the distribution of HDMI video and multi-channel audio
- Long distance wireless transmitter for video and embedded audio
- Video input requirements
- Shall provide one (1) HDMI Type A connector for digital video signals with embedded audio
- Shall support HDMI specifications including data rates up to 6.75 Gbps, Deep Color up to 12 bits, 3D, and multi-channel audio formats
- Shall support computer video up to 1920x1080, including HDTV 1080p @ 60 Hz
- Audio input requirements
- Shall support embedded audio on HDMI input connector
- Shall support PCM, DTS, and Dolby 5.1 audio formats
- Communication requirements
- Shall support EDID and HDCP pass-through on HDMI input connector
- Control output requirements
- Shall provide one 3.5 mm jack for IR emitter connection
- Shall support IR remote control pass-through transmission from receiver to transmitter to control source equipment, such as a Blu-ray Disc player
- Interconnection requirements
- Shall provide wireless omnidirectional interconnection between transmitter and receiver
- Shall provide internal antennas for wireless transmission
- Transmission requirements
- Shall provide a signal transmission distance capability of 100’ (30 m) at 1920x1080, including HDTV 1080p @ 60 Hz
- Shall support extension of video with embedded audio wirelessly
- Shall support less than one millisecond of latency for video and audio signals
- Shall operate in the 5 GHz spectrum
- Shall provide Automatic Frequency Selection – AFS and Dynamic Frequency Selection – DFS
- Shall actively monitor RF spectrum for interference from other wireless devices
- Shall automatically select an appropriate transmission channel to prevent interference from other devices
- Shall support multi-input and multi-output – MIMO wireless technology
- Shall support Advanced Encryption Standard – AES 128 for secure data transmission
- Shall provide the capability to register a single transmitter with up to four receivers, simultaneously, enabling a single source to support up to four display devices
- HDCP requirements
- Shall be HDCP compliant
- Power requirements
- Shall provide connection for 5 VDC power on one barrel connector
- Shall be equipped with an external, universal AC power supply capable of supporting 100 – 240 VAC, 50/60 Hz power
- General requirements
- Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
- Shall provide visual signal on LED indicators located on the top panel for link status, video signal presence, and power
- Shall provide a recessed button located on the top panel to register a transmitter to a receiver
- Shall provide a recessed button located on the top panel to reset the transmitter connection with the receiver
- Shall have a compact enclosure
- Shall be wall mountable with included mounting kit
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Shall provide at least three years parts and labor warranty
- Shall be compatible with the eLink 100 R AUS wireless receiver
- Approved device shall be the Extron eLink 100 T AUS (60-1490-22); no alternates or equals
eLink 100 T AUS
- Provide a wireless transmitter that shall support the distribution of HDMI video and multi-channel audio
- Long distance wireless transmitter for video and embedded audio
- Video input requirements
- Shall provide one (1) HDMI Type A connector for digital video signals with embedded audio
- Shall support HDMI specifications including data rates up to 6.75 Gbps, Deep Color up to 12 bits, 3D, and multi-channel audio formats
- Shall support computer video up to 1920x1080, including HDTV 1080p @ 60 Hz
- Audio input requirements
- Shall support embedded audio on HDMI input connector
- Shall support PCM, DTS, and Dolby 5.1 audio formats
- Communication requirements
- Shall support EDID and HDCP pass-through on HDMI input connector
- Control output requirements
- Shall provide one 3.5 mm jack for IR emitter connection
- Shall support IR remote control pass-through transmission from receiver to transmitter to control source equipment, such as a Blu-ray Disc player
- Interconnection requirements
- Shall provide wireless omnidirectional interconnection between transmitter and receiver
- Shall provide internal antennas for wireless transmission
- Transmission requirements
- Shall provide a signal transmission distance capability of 100’ (30 m) at 1920x1080, including HDTV 1080p @ 60 Hz
- Shall support extension of video with embedded audio wirelessly
- Shall support less than one millisecond of latency for video and audio signals
- Shall operate in the 5 GHz spectrum
- Shall provide Automatic Frequency Selection – AFS and Dynamic Frequency Selection – DFS
- Shall actively monitor RF spectrum for interference from other wireless devices
- Shall automatically select an appropriate transmission channel to prevent interference from other devices
- Shall support multi-input and multi-output – MIMO wireless technology
- Shall support Advanced Encryption Standard – AES 128 for secure data transmission
- Shall provide the capability to register a single transmitter with up to four receivers, simultaneously, enabling a single source to support up to four display devices
- HDCP requirements
- Shall be HDCP compliant
- Power requirements
- Shall provide connection for 5 VDC power on one barrel connector
- Shall be equipped with an external, universal AC power supply capable of supporting 100 – 240 VAC, 50/60 Hz power
- General requirements
- Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
- Shall provide visual signal on LED indicators located on the top panel for link status, video signal presence, and power
- Shall provide a recessed button located on the top panel to register a transmitter to a receiver
- Shall provide a recessed button located on the top panel to reset the transmitter connection with the receiver
- Shall have a compact enclosure
- Shall be wall mountable with included mounting kit
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Shall provide at least three years parts and labor warranty
- Shall be compatible with the eLink 100 R AUS wireless receiver
- Approved device shall be the Extron eLink 100 T AUS (60-1490-22); no alternates or equals
eLink 100 R AUS
- Shall provide a wireless receiver that shall support the distribution of HDMI video and multi-channel audio
- Long distance wireless receiver for video and embedded audio
- Video output requirements
- Shall provide one (1) HDMI Type A connector for digital video signals with embedded audio
- Shall support HDMI specifications including data rates up to 6.75 Gbps, Deep Color up to 12 bits, 3D, and multi-channel audio formats
- Shall support computer video up to 1920x1080, including HDTV 1080p @ 60 Hz
- Audio output requirements
- Shall support embedded audio on HDMI output connector
- Shall support PCM, DTS, and Dolby 5.1 audio formats
- Communication requirements
- Shall support EDID and HDCP pass-through on HDMI output connector
- Control input requirements
- Shall provide one IR detector input
- Shall support IR remote control for configuration and setup
- Shall provide on-screen display – OSD menus for setup and configuration
- Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment, such as a Blu-ray player
- Interconnection requirements
- Shall provide wireless omnidirectional interconnection between transmitter and receiver
- Shall provide internal antennas for wireless transmission
- Transmission requirements
- Shall provide a signal transmission distance capability of 100’ (30 m) at 1920x1080, including HDTV 1080p @ 60 Hz
- Shall support extension of video with embedded audio wirelessly
- Shall support less than one millisecond of latency for video and audio signals
- Shall operate in the 5 GHz spectrum
- Shall provide Automatic Frequency Selection – AFS and Dynamic Frequency Selection – DFS
- Shall actively monitor RF spectrum for interference from other wireless devices
- Shall automatically select an appropriate transmission channel to prevent interference from other devices
- Shall support multi-input and multi-output – MIMO wireless technology
- Shall support Advanced Encryption Standard – AES 128 for secure data transmission
- Shall provide the capability to register a single transmitter with up to four receivers, simultaneously, enabling a single source to support up to four display devices
- HDCP requirements
- Shall be HDCP compliant
- Power requirements
- Shall provide a button located on the top panel to power up and power down the unit
- Shall provide connection for 5 VDC power on one USB mini plug connector
- Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
- General requirements
- Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
- Shall provide visual signal on LED indicators for link status, video signal presence, and power
- Shall provide a button located on the top panel to register a transmitter to a receiver
- Shall have a compact enclosure
- Shall be wall mountable with included mounting kit
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Shall provide at least three years parts and labor warranty
- Shall be compatible with the eLink 100 T AUS wireless transmitter
- Approved device shall be the Extron eLink 100 R AUS (60-1490-23); no alternates or equals
eLink 100 R AUS
- Shall provide a wireless receiver that shall support the distribution of HDMI video and multi-channel audio
- Long distance wireless receiver for video and embedded audio
- Video output requirements
- Shall provide one (1) HDMI Type A connector for digital video signals with embedded audio
- Shall support HDMI specifications including data rates up to 6.75 Gbps, Deep Color up to 12 bits, 3D, and multi-channel audio formats
- Shall support computer video up to 1920x1080, including HDTV 1080p @ 60 Hz
- Audio output requirements
- Shall support embedded audio on HDMI output connector
- Shall support PCM, DTS, and Dolby 5.1 audio formats
- Communication requirements
- Shall support EDID and HDCP pass-through on HDMI output connector
- Control input requirements
- Shall provide one IR detector input
- Shall support IR remote control for configuration and setup
- Shall provide on-screen display – OSD menus for setup and configuration
- Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment, such as a Blu-ray player
- Interconnection requirements
- Shall provide wireless omnidirectional interconnection between transmitter and receiver
- Shall provide internal antennas for wireless transmission
- Transmission requirements
- Shall provide a signal transmission distance capability of 100’ (30 m) at 1920x1080, including HDTV 1080p @ 60 Hz
- Shall support extension of video with embedded audio wirelessly
- Shall support less than one millisecond of latency for video and audio signals
- Shall operate in the 5 GHz spectrum
- Shall provide Automatic Frequency Selection – AFS and Dynamic Frequency Selection – DFS
- Shall actively monitor RF spectrum for interference from other wireless devices
- Shall automatically select an appropriate transmission channel to prevent interference from other devices
- Shall support multi-input and multi-output – MIMO wireless technology
- Shall support Advanced Encryption Standard – AES 128 for secure data transmission
- Shall provide the capability to register a single transmitter with up to four receivers, simultaneously, enabling a single source to support up to four display devices
- HDCP requirements
- Shall be HDCP compliant
- Power requirements
- Shall provide a button located on the top panel to power up and power down the unit
- Shall provide connection for 5 VDC power on one USB mini plug connector
- Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
- General requirements
- Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
- Shall provide visual signal on LED indicators for link status, video signal presence, and power
- Shall provide a button located on the top panel to register a transmitter to a receiver
- Shall have a compact enclosure
- Shall be wall mountable with included mounting kit
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Shall provide at least three years parts and labor warranty
- Shall be compatible with the eLink 100 T AUS wireless transmitter
- Approved device shall be the Extron eLink 100 R AUS (60-1490-23); no alternates or equals
把商品添加到购物车
Order Message Number
产品编号
注: 使用通用交流电源插座的 Extron 产品可支持多种不同的交流电源插头类型。在使用之前，确保设备满足您所在区域的所有规定要求，并符合所有应用的本地安全和电气规程及标准。
当前总计：
Annotation Graphics Processor
To view this page ensure that Adobe Flash Player version
11.0.0 or greater is installed and enabled.
Chrome
Firefox
Edge
Safari