近期查看的产品
IPL EXP PDU8L
建筑工程规范
选择一个产品编号：
复制文本
已复制！
发生错误。请稍后重试。
IPL EXP PDU8L
- Provide an Ethernet-enabled power expansion interface for the purpose of remotely powering and monitoring connected AV equipment and AV systems.
- Ethernet enabled power expansion interface
- Device shall have eight 12-volt outputs on captive screw connectors located on the back of the expansion interface that can provide a combined total of 60 watts of power for powering auxiliary devices.
- Device shall have a thermocouple port on a on captive screw connector located on the back of the expansion interface that can be used to monitor temperature conditions of an attached device and can be used to trigger an alarm if the temperature falls outside of the user defined threshold when used with an Extron control system
- Device shall include a thermistor probe
- Device shall have a female RJ-45 jack located on the back of the enclosure that allows for ethernet based control of the power expansion interface while supporting 10/100 Base-T, half/full duplex with auto-detect for connection to a LAN or WAN and includes link and activity LED indicators located on the jack for troubleshooting network issues
- Device shall include a multi-function button located on the front of the enclosure that allows for the reset of the device or its communication properties at minimum
- Provide front panel LED activity indicators for power status, reset status, switched 12-volt output port status, temperature status, and network status
- Device shall support the following protocols: ARP, DHCP, DNS, HTTP (redirect), HTTPS, ICMP (ping), IEEE 802.1X, NTP, SFTP, SNMP, SSH, TCP/IP, UDP/IP
- Supports a web-based AV resource management application that provides a means to manage, monitor, and control AV equipment
- Device shall support aggregate current sensing for monitoring of power consumption that can be used for reporting and troubleshooting purposes
- Device shall have at least 512 MB of nonvolatile memory
- Device shall be equipped with an internal universal AC power supply capable of supporting 100 – 240 VAC, 50/60 Hz power.
- Mounting requirements
- Device shall be housed in a 1 RU, quarter rack width metal enclosure
- Device shall be rack mountable using an optional rack shelf.
- Device shall be able to be installed under a table, desk, or other flat surface using an optional mounting kit
- Software requirements
- The device may be configured or programmed using Extron’s Global Configurator Plus or Professional, or ControlScript Deployment Utility respectively
- Device drivers and modules can be obtained through Extron support resources and database
- Shall be configured or programmed by an Extron authorized user.
- The device’s configuration and settings shall be managed using either Extron’s Toolbelt software or via SIS-over-SSH
- Device shall include an embedded default webpage allowing for simple standalone control of the switched 12-volt outputs, support for basic schedules and viewing of the activity logs
- Device shall be able to operate independently using a secure Extron API
- Security Requirements
- Device shall support SFTP and SSH for secure communication between the control processor and the IPL EXP PDU
- Device shall support HTTPS for secure communication between the IPL EXP PDU and the embedded web pages
- Device shall provide the option to modify administrator and user credentials
- Device shall support security updates to maintain network health
- Device shall require that a Secure Socket Layer (SSL) Certificate is installed to maintain system confidentiality and data integrity
- Device shall support the installation of an owner furnished certificate with the following properties:
- Certificates shall include x.509 support
- Certificates shall include public / private key exchange
- Certificates shall support PEM encoding
- Extron shall furnish documentation that describes all supported network ports and services
- Shall meet regulatory compliances
- CE
- C-Tick
- c-UL
- FCC Class A
- ICES
- UL
- VCCI
- RoHs
- WEEE
- Product Warranty
- Shall provide at least 3 years parts and labor
- Approved device shall be the Extron IPL EXP PDU8L, part number 60-1928-01, no alternates or equals
- Ethernet enabled power expansion interface
IPL EXP PDU8L
- Provide an Ethernet-enabled power expansion interface for the purpose of remotely powering and monitoring connected AV equipment and AV systems.
- Ethernet enabled power expansion interface
- Device shall have eight 12-volt outputs on captive screw connectors located on the back of the expansion interface that can provide a combined total of 60 watts of power for powering auxiliary devices.
- Device shall have a thermocouple port on a on captive screw connector located on the back of the expansion interface that can be used to monitor temperature conditions of an attached device and can be used to trigger an alarm if the temperature falls outside of the user defined threshold when used with an Extron control system
- Device shall include a thermistor probe
- Device shall have a female RJ-45 jack located on the back of the enclosure that allows for ethernet based control of the power expansion interface while supporting 10/100 Base-T, half/full duplex with auto-detect for connection to a LAN or WAN and includes link and activity LED indicators located on the jack for troubleshooting network issues
- Device shall include a multi-function button located on the front of the enclosure that allows for the reset of the device or its communication properties at minimum
- Provide front panel LED activity indicators for power status, reset status, switched 12-volt output port status, temperature status, and network status
- Device shall support the following protocols: ARP, DHCP, DNS, HTTP (redirect), HTTPS, ICMP (ping), IEEE 802.1X, NTP, SFTP, SNMP, SSH, TCP/IP, UDP/IP
- Supports a web-based AV resource management application that provides a means to manage, monitor, and control AV equipment
- Device shall support aggregate current sensing for monitoring of power consumption that can be used for reporting and troubleshooting purposes
- Device shall have at least 512 MB of nonvolatile memory
- Device shall be equipped with an internal universal AC power supply capable of supporting 100 – 240 VAC, 50/60 Hz power.
- Mounting requirements
- Device shall be housed in a 1 RU, quarter rack width metal enclosure
- Device shall be rack mountable using an optional rack shelf.
- Device shall be able to be installed under a table, desk, or other flat surface using an optional mounting kit
- Software requirements
- The device may be configured or programmed using Extron’s Global Configurator Plus or Professional, or ControlScript Deployment Utility respectively
- Device drivers and modules can be obtained through Extron support resources and database
- Shall be configured or programmed by an Extron authorized user.
- The device’s configuration and settings shall be managed using either Extron’s Toolbelt software or via SIS-over-SSH
- Device shall include an embedded default webpage allowing for simple standalone control of the switched 12-volt outputs, support for basic schedules and viewing of the activity logs
- Device shall be able to operate independently using a secure Extron API
- Security Requirements
- Device shall support SFTP and SSH for secure communication between the control processor and the IPL EXP PDU
- Device shall support HTTPS for secure communication between the IPL EXP PDU and the embedded web pages
- Device shall provide the option to modify administrator and user credentials
- Device shall support security updates to maintain network health
- Device shall require that a Secure Socket Layer (SSL) Certificate is installed to maintain system confidentiality and data integrity
- Device shall support the installation of an owner furnished certificate with the following properties:
- Certificates shall include x.509 support
- Certificates shall include public / private key exchange
- Certificates shall support PEM encoding
- Extron shall furnish documentation that describes all supported network ports and services
- Shall meet regulatory compliances
- CE
- C-Tick
- c-UL
- FCC Class A
- ICES
- UL
- VCCI
- RoHs
- WEEE
- Product Warranty
- Shall provide at least 3 years parts and labor
- Approved device shall be the Extron IPL EXP PDU8L, part number 60-1928-01, no alternates or equals
- Ethernet enabled power expansion interface
把商品添加到购物车
Order Message Number
产品编号
注: 使用通用交流电源插座的 Extron 产品可支持多种不同的交流电源插头类型。在使用之前，确保设备满足您所在区域的所有规定要求，并符合所有应用的本地安全和电气规程及标准。
当前总计：
Annotation Graphics Processor
To view this page ensure that Adobe Flash Player version
11.0.0 or greater is installed and enabled.
Chrome
Firefox
Edge
Safari