近期查看的产品
AXI 22 AT D Plus
建筑工程规范
选择一个产品编号:
复制文本
已复制!
发生错误。请稍后重试。
AXI 22 AT D Plus
- Provide a remotely controllable, single-gang decorator-style Dante™ audio interface that shall support two mono analog inputs capable of microphone or line level signals, placed directly onto a Dante audio network, and two mono analog line level outputs for audio received from the Dante network.
- Two input, two output, single-gang decorator-style audio expansion interface with Dante audio networking, and 24-bit audio converters
- Input Requirements
- Shall support two mono, microphone or line level, balanced or unbalanced signals on two female XLR connectors
- Shall provide selectable +48 volt phantom power for condenser microphones on each mic/line input
- Shall provide analog to digital conversion at selectable sampling rates with 24-bit resolution via Dante Controller
- Shall support 44.1, 48, 88.2, and 96 kHz sampling rates
- Output Requirements
- Shall support two mono line level, balanced or unbalanced signals on one 6-pole, 3.5 mm captive screw connector
- Outputs will be routed from Dante audio network
- Shall provide digital to analog conversion at selectable sampling rates with 24-bit resolution via Dante Controller
- Shall support two mono line level, balanced or unbalanced signals on one 6-pole, 3.5 mm captive screw connector
- Input Requirements
- Two input, two output, single-gang decorator-style audio expansion interface with Dante audio networking, and 24-bit audio converters
- Shall support 44.1, 48, 88.2, and 96 kHz sampling rates
- Configuration Software Requirements
- Shall provide PC-based DSP Configurator software allowing flexible control of the audio expansion interface’s fixed architecture
- Shall provide a Live mode for real-time control of parameters
- Shall provide an Emulate mode for offline configuration
- Shall provide a single window view of all inputs and outputs
- Shall provide setup and configuration of processing blocks including, but not limited to: gain stages, channel mute, and phantom power
- Shall provide cut, copy, and paste editing between processing blocks
- Shall provide real-time metering of levels within each processing block in Live mode
- Shall provide a Meter Bridge window for real-time metering of all input and output channels with clipping indication in Live mode
- Shall provide keyboard-based navigation of configuration software utilizing bidirectional controls, keyboard shortcuts, and spreadsheet software-style commands
- Shall provide file saving in both Live and Emulate mode
- Shall provide file upload in both Live and Emulate mode
- Shall provide configuration and file saving of multiple, linked or networked processors from a single configuration session
- Dante Audio Networking Requirements
- Shall support incoming and outgoing channels over a local area network using standard Internet protocols
- Up to two outgoing Dante channels may be routed to a Dante-equipped digital signal processor
- Up to two incoming Dante channels from a Dante-equipped digital signal processor may be tied to the audio interface’s output section
- Shall support Dante Controller software for digital audio network configuration
- Shall support Dante Domain Manager network management software for network security and logical segmenting.
- Shall support the AES67 standard for interoperability with other devices that also support AES67
- Shall provide an RJ-45 connector to support Dante audio network connection
- Shall provide uncompressed digital audio at selectable sampling rates with 24-bit resolution via Dante Controller
- Shall support 44.1, 48, 88.2, and 96 kHz sampling rates
- Shall support incoming and outgoing channels over a local area network using standard Internet protocols
- Control Requirements
- Shall provide Ethernet monitoring and control via the Dante protocol using DSP Configurator software
- Shall support remote control operation via USB using DSP Configurator software
- Front Panel Requirements
- Shall provide two mono mic/line level inputs on female XLR connectors
- Shall provide one USB-C port for connection to a Windows computer running DSP Configurator Software
- Shall be concealed behind a removable cover plate
- Shall provide a reset button
- Shall be concealed behind a removable cover plate
- Rear Panel Requirements
- Shall provide an RJ-45 connector to support Dante digital audio network connection, up to two outgoing digital audio channels, up to two incoming digital audio channels, and PoE - Power over Ethernet
- Shall provide two balanced or unbalanced line level outputs on 6-pole, 3.5 mm captive screw connector
- General Requirements
- Shall support optional energy-efficient external universal power supply with 2-pole captive screw connector
- Shall be universal in-line power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
- Shall provide output of 12 VDC, 0.5 A, 6 watts
- Shall support use of optional Extron ZipClip™ 100 mounting kit
- Shall meet energy efficiency level V and bear the UL Environment Energy Efficiency Certification (EEC) Mark
- Shall support remote powering through PoE with RJ-45 connection
- Shall conform to 802.3af standard
- Shall mount in an included decorator-style wallplate
- Shall include both black and white faceplates
- Shall meet regulatory compliances
- Shall meet safety compliances under CE and c-UL
- Shall meet EMI/EMC compliances under CE, C-Tick, c-UL, FCC Class A, ICES, and VCCI
- Shall comply with appropriate requirements of RoHS and WEEE
- Shall provide three years parts and labor warranty
- Shall support optional energy-efficient external universal power supply with 2-pole captive screw connector
- Configuration Software Requirements
- Approved device shall be the Extron AXI 22 AT D Plus, part number 60-1947-01; no alternates or equals.
AXI 22 AT D Plus
- Provide a remotely controllable, single-gang decorator-style Dante™ audio interface that shall support two mono analog inputs capable of microphone or line level signals, placed directly onto a Dante audio network, and two mono analog line level outputs for audio received from the Dante network.
- Two input, two output, single-gang decorator-style audio expansion interface with Dante audio networking, and 24-bit audio converters
- Input Requirements
- Shall support two mono, microphone or line level, balanced or unbalanced signals on two female XLR connectors
- Shall provide selectable +48 volt phantom power for condenser microphones on each mic/line input
- Shall provide analog to digital conversion at selectable sampling rates with 24-bit resolution via Dante Controller
- Shall support 44.1, 48, 88.2, and 96 kHz sampling rates
- Output Requirements
- Shall support two mono line level, balanced or unbalanced signals on one 6-pole, 3.5 mm captive screw connector
- Outputs will be routed from Dante audio network
- Shall provide digital to analog conversion at selectable sampling rates with 24-bit resolution via Dante Controller
- Shall support two mono line level, balanced or unbalanced signals on one 6-pole, 3.5 mm captive screw connector
- Input Requirements
- Two input, two output, single-gang decorator-style audio expansion interface with Dante audio networking, and 24-bit audio converters
- Shall support 44.1, 48, 88.2, and 96 kHz sampling rates
- Configuration Software Requirements
- Shall provide PC-based DSP Configurator software allowing flexible control of the audio expansion interface’s fixed architecture
- Shall provide a Live mode for real-time control of parameters
- Shall provide an Emulate mode for offline configuration
- Shall provide a single window view of all inputs and outputs
- Shall provide setup and configuration of processing blocks including, but not limited to: gain stages, channel mute, and phantom power
- Shall provide cut, copy, and paste editing between processing blocks
- Shall provide real-time metering of levels within each processing block in Live mode
- Shall provide a Meter Bridge window for real-time metering of all input and output channels with clipping indication in Live mode
- Shall provide keyboard-based navigation of configuration software utilizing bidirectional controls, keyboard shortcuts, and spreadsheet software-style commands
- Shall provide file saving in both Live and Emulate mode
- Shall provide file upload in both Live and Emulate mode
- Shall provide configuration and file saving of multiple, linked or networked processors from a single configuration session
- Dante Audio Networking Requirements
- Shall support incoming and outgoing channels over a local area network using standard Internet protocols
- Up to two outgoing Dante channels may be routed to a Dante-equipped digital signal processor
- Up to two incoming Dante channels from a Dante-equipped digital signal processor may be tied to the audio interface’s output section
- Shall support Dante Controller software for digital audio network configuration
- Shall support Dante Domain Manager network management software for network security and logical segmenting.
- Shall support the AES67 standard for interoperability with other devices that also support AES67
- Shall provide an RJ-45 connector to support Dante audio network connection
- Shall provide uncompressed digital audio at selectable sampling rates with 24-bit resolution via Dante Controller
- Shall support 44.1, 48, 88.2, and 96 kHz sampling rates
- Shall support incoming and outgoing channels over a local area network using standard Internet protocols
- Control Requirements
- Shall provide Ethernet monitoring and control via the Dante protocol using DSP Configurator software
- Shall support remote control operation via USB using DSP Configurator software
- Front Panel Requirements
- Shall provide two mono mic/line level inputs on female XLR connectors
- Shall provide one USB-C port for connection to a Windows computer running DSP Configurator Software
- Shall be concealed behind a removable cover plate
- Shall provide a reset button
- Shall be concealed behind a removable cover plate
- Rear Panel Requirements
- Shall provide an RJ-45 connector to support Dante digital audio network connection, up to two outgoing digital audio channels, up to two incoming digital audio channels, and PoE - Power over Ethernet
- Shall provide two balanced or unbalanced line level outputs on 6-pole, 3.5 mm captive screw connector
- General Requirements
- Shall support optional energy-efficient external universal power supply with 2-pole captive screw connector
- Shall be universal in-line power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
- Shall provide output of 12 VDC, 0.5 A, 6 watts
- Shall support use of optional Extron ZipClip™ 100 mounting kit
- Shall meet energy efficiency level V and bear the UL Environment Energy Efficiency Certification (EEC) Mark
- Shall support remote powering through PoE with RJ-45 connection
- Shall conform to 802.3af standard
- Shall mount in an included decorator-style wallplate
- Shall include both black and white faceplates
- Shall meet regulatory compliances
- Shall meet safety compliances under CE and c-UL
- Shall meet EMI/EMC compliances under CE, C-Tick, c-UL, FCC Class A, ICES, and VCCI
- Shall comply with appropriate requirements of RoHS and WEEE
- Shall provide three years parts and labor warranty
- Shall support optional energy-efficient external universal power supply with 2-pole captive screw connector
- Configuration Software Requirements
- Approved device shall be the Extron AXI 22 AT D Plus, part number 60-1947-01; no alternates or equals.
把商品添加到购物车
Order Message Number
产品编号
注: 使用通用交流电源插座的 Extron 产品可支持多种不同的交流电源插头类型。在使用之前,确保设备满足您所在区域的所有规定要求,并符合所有应用的本地安全和电气规程及标准。
当前总计:

Chrome
Firefox
Edge
Safari