XTP CP 4K I/O 板
带 RS-232 和红外插入的 XTP 4K 发送器和接收器板
近期查看的产品
XTP CP 4K I/O 板
建筑工程规范
选择一个产品编号：
复制文本
已复制！
发生错误。请稍后重试。
XTP CP 4i 4K
- Provide a four (4) input twisted pair receiver board that is compatible with the video matrix switcher and occupies one (1) input slot
- Single slot input board that accepts twisted pair signals from XTP system transmitters
- Shall provide four (4) RJ-45 style jacks for digital video
- Shall provide four (4) RJ-45 style jacks for Ethernet extension via independent RJ-45 jacks to extend network information over a shielded CATx cable with video, audio, and control signals
- Shall provide four (4) 5-pole captive screw connectors for bidirectional RS-232 and infrared (IR) signal pass-through
- Shall support signal extension of 4K video, audio, and control signals plus Ethernet up to 330 feet (100 meters)
- Shall support video resolutions up to 4096x2160 at 30 Hz with 4:4:4 color sampling
- Shall support RGB and YCbCr color space formats
- Shal support HDMI specifications of
- Data rates up 10.2 Gbps
- Deep Color up to 12-bit
- 3D content
- HD lossless audio formats
- HDCP requirements
- Shall be HDCP 2.3 compliant
- Shall support authentication and maintain continuous verification of HDCP key exchange between connected devices
- EDID requirements
- Shall provide automatic EDID management between connected devices
- Maintain continuous EDID communication with the connected source
- Shall provide automatic EDID management between connected devices
- Audio requirements
- Shall support multiple embedded audio formats
- Shall support the ability to break away an audio signal from its corresponding video signal
- Remote power requirements
- Shall support remote power to twisted pair transmitters when used in conjunction with configurable video matrix switcher
- Shall not require an external power supply to provide remote power to twisted pair receivers
- Shall support remote power to transmitters when used in conjunction with configurable video matrix switcher
- General requirements
- Shall be hot-swappable
- Shall allow setup and configuration through a system-wide management software from an XTP matrix switcher communication channel
- Shall provide at least three (3) years parts and labor warranty
- Shall be compatible with XTP II CrossPoint and XTP CrossPoint matrix switchers
- Approved device shall be the Extron XTP CP 4i 4K (70-940-31); no alternates or equals
- Single slot input board that accepts twisted pair signals from XTP system transmitters
XTP CP 4i 4K
- Provide a four (4) input twisted pair receiver board that is compatible with the video matrix switcher and occupies one (1) input slot
- Single slot input board that accepts twisted pair signals from XTP system transmitters
- Shall provide four (4) RJ-45 style jacks for digital video
- Shall provide four (4) RJ-45 style jacks for Ethernet extension via independent RJ-45 jacks to extend network information over a shielded CATx cable with video, audio, and control signals
- Shall provide four (4) 5-pole captive screw connectors for bidirectional RS-232 and infrared (IR) signal pass-through
- Shall support signal extension of 4K video, audio, and control signals plus Ethernet up to 330 feet (100 meters)
- Shall support video resolutions up to 4096x2160 at 30 Hz with 4:4:4 color sampling
- Shall support RGB and YCbCr color space formats
- Shal support HDMI specifications of
- Data rates up 10.2 Gbps
- Deep Color up to 12-bit
- 3D content
- HD lossless audio formats
- HDCP requirements
- Shall be HDCP 2.3 compliant
- Shall support authentication and maintain continuous verification of HDCP key exchange between connected devices
- EDID requirements
- Shall provide automatic EDID management between connected devices
- Maintain continuous EDID communication with the connected source
- Shall provide automatic EDID management between connected devices
- Audio requirements
- Shall support multiple embedded audio formats
- Shall support the ability to break away an audio signal from its corresponding video signal
- Remote power requirements
- Shall support remote power to twisted pair transmitters when used in conjunction with configurable video matrix switcher
- Shall not require an external power supply to provide remote power to twisted pair receivers
- Shall support remote power to transmitters when used in conjunction with configurable video matrix switcher
- General requirements
- Shall be hot-swappable
- Shall allow setup and configuration through a system-wide management software from an XTP matrix switcher communication channel
- Shall provide at least three (3) years parts and labor warranty
- Shall be compatible with XTP II CrossPoint and XTP CrossPoint matrix switchers
- Approved device shall be the Extron XTP CP 4i 4K (70-940-31); no alternates or equals
- Single slot input board that accepts twisted pair signals from XTP system transmitters
XTP CP 4o 4K
- Provide a four (4) output twisted pair transmitter board that is compatible with the video matrix switcher and occupies one (1) output slot
- Single slot output board that transmits twisted pair signals to XTP system receivers
- Shall provide four (4) RJ-45 style jacks for digital video
- Shall provide four (4) RJ-45 style jacks for Ethernet extension via independent RJ-45 jacks to extend network information over a shielded CATx cable with video, audio, and control signals
- Shall provide four (4) 5-pole captive screw connectors for bidirectional RS-232 and infrared (IR) signal pass-through
- Shall support signal extension of 4K video, audio, and control signals plus Ethernet up to 330 feet (100 meters)
- Shall support video resolutions up to 4096x2160 at 30 Hz with 4:4:4 color sampling
- Shall support RGB and YCbCr color space formats
- Shall support HDMI specifications of
- Data rates up 10.2 Gbps
- Deep Color up to 12-bit
- 3D content
- HD lossless audio formats
- HDCP requirements
- Shall be HDCP 2.3 compliant
- Shall support authentication and maintain continuous verification of HDCP key exchange between connected devices
- EDID requirements
- Shall provide automatic EDID management between connected devices
- Maintain continuous EDID communication with the connected source
- Shall provide automatic EDID management between connected devices
- Audio requirements
- Shall support multiple embedded audio formats
- Remote power requirements
- Shall support remote power to receivers when used in conjunction with configurable video matrix switcher
- Shall not require an external power supply to provide remote power to twisted pair receivers
- General requirements
- Shall be hot-swappable
- Shall allow setup and configuration through a system-wide management software from an XTP matrix switcher communication channel
- Shall provide at least three (3) years parts and labor warranty
- Shall be compatible with XTP II CrossPoint and XTP CrossPoint matrix switchers
- Approved device shall be the Extron XTP CP 4o 4K (70-943-31); no alternates or equals
- Single slot output board that transmits twisted pair signals to XTP system receivers
XTP CP 4o 4K
- Provide a four (4) output twisted pair transmitter board that is compatible with the video matrix switcher and occupies one (1) output slot
- Single slot output board that transmits twisted pair signals to XTP system receivers
- Shall provide four (4) RJ-45 style jacks for digital video
- Shall provide four (4) RJ-45 style jacks for Ethernet extension via independent RJ-45 jacks to extend network information over a shielded CATx cable with video, audio, and control signals
- Shall provide four (4) 5-pole captive screw connectors for bidirectional RS-232 and infrared (IR) signal pass-through
- Shall support signal extension of 4K video, audio, and control signals plus Ethernet up to 330 feet (100 meters)
- Shall support video resolutions up to 4096x2160 at 30 Hz with 4:4:4 color sampling
- Shall support RGB and YCbCr color space formats
- Shall support HDMI specifications of
- Data rates up 10.2 Gbps
- Deep Color up to 12-bit
- 3D content
- HD lossless audio formats
- HDCP requirements
- Shall be HDCP 2.3 compliant
- Shall support authentication and maintain continuous verification of HDCP key exchange between connected devices
- EDID requirements
- Shall provide automatic EDID management between connected devices
- Maintain continuous EDID communication with the connected source
- Shall provide automatic EDID management between connected devices
- Audio requirements
- Shall support multiple embedded audio formats
- Remote power requirements
- Shall support remote power to receivers when used in conjunction with configurable video matrix switcher
- Shall not require an external power supply to provide remote power to twisted pair receivers
- General requirements
- Shall be hot-swappable
- Shall allow setup and configuration through a system-wide management software from an XTP matrix switcher communication channel
- Shall provide at least three (3) years parts and labor warranty
- Shall be compatible with XTP II CrossPoint and XTP CrossPoint matrix switchers
- Approved device shall be the Extron XTP CP 4o 4K (70-943-31); no alternates or equals
- Single slot output board that transmits twisted pair signals to XTP system receivers
把商品添加到购物车
Order Message Number
产品编号
注: 使用通用交流电源插座的 Extron 产品可支持多种不同的交流电源插头类型。在使用之前，确保设备满足您所在区域的所有规定要求，并符合所有应用的本地安全和电气规程及标准。
当前总计：
Annotation Graphics Processor
To view this page ensure that Adobe Flash Player version
11.0.0 or greater is installed and enabled.
Chrome
Firefox
Edge
Safari